| 通用 | | - IEC 68-2-9, Basic Environmental Testing Procedures-Part 2:Guidance for Solar Radiation Testing
- ISO 4892-1, Plastics-Methods of exposure to laboratory light sources-Part 1: General Guidance
- ASTM G151, General Guidelines for Exposure of Nonmetallic Materials
- ASTM G155, Xenon-Arc Test Apparatus for Exposure of Nonmetallic Materials
- GB/T 16422.1，塑料實驗室光源暴露試驗方法 第1部分：總則
|
| | 汽車 | | - SAE J2412, Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
- SAE J2527, Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus
- QB/T 2727，皮革 色牢度試驗 耐光色牢度：氙弧
- ASTM D7356, Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
|
| | 涂料 | | - ISO 11341, Paintsvarnishes - Artificial weatheringexposure to artificial radiation - Exposure to filtered xenon-arc radiation
- ASTM D3451, Testing Coating PowdersPowder Coatings
- ASTM D3794, Testing Coil Coatings
- ASTM D6577, Standard Guide for Testing Industrial Protective Coatings
- ASTM D6695, Xenon-Arc Exposures of PaintsRelated Coatings
- GB 1865, 色漆和清漆 人工氣候老化和人工輻射暴露（濾過的氙弧輻射）
- JIS K 5600-7-7, Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 7: Accelerated Weathering (Exposure to Filtered Xenon Arc)
- MPI: #113, Exterior, Waterborne, Pigmented Elastomeric Coating
- MS 133: Part F14, Methods of Test for Paints & Varnishes: Part F14: Artificial Weathering & Exposure to Artificial Radiation – Exposure to Filtered Xenon Arc Radiation (ISO 11341)
|
| | 醫藥 | | - ICH Guideline, Stability Testing: Photostability Testing of New Drug SubstancesProducts
|
| | 塑料 | | - ISO 4892-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
- JIS K 7350-2, Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
- DIN EN 513, Unplasticized polyvinylchloride (PVC-U) profiles for fabrication of windows & doors
- ASTM D1248 , Polyethylene Plastic Extrusion Materials for WireCable
- ASTM D2565 , Xenon-Arc – Plastics for Outdoor Applications
- ASTM D4101, Polypropylene Plastic InjectionExtrusion Materials
- ASTM D4459 , Xenon-Arc – Plastics for Indoor Applications
- ASTM D5071, Xenon-Arc Exposure of Photodegradable Plastics
- ASTM D6662, Plastic Lumber Decking Boards
- UL 1581, Reference Standard for Electrical Wires, Cables & Flexible Cords
- GB/T 16422.2，塑料實驗室光源暴露試驗方法 第2部分：氙弧燈
|
| | 土工布 | | - ASTM D4355, Deterioration of Geotextiles to UV Light
|
| | | | - AATCC TM 16, Colorfastness to Light
- AATCC TM 169,Weather Resistance of Textiles: Xenon Lamp Exposure
- GB/T-8430, 紡織品 色牢度試驗 耐人造氣候色牢度：氙弧
- IS: 2454, Indian Standard- Method for Determination of Colour Fastness of Textile Materials to Artificial Light (Xenon Lamp) •
- GB/T 8427，紡織品 色牢度試驗 耐人造光色牢度：氙弧
- GB/T 8431，紡織品 色牢度試驗 光致變色的檢驗和評定
- GB/T 8432，耐光色牢度試驗儀用濕度控制標樣
- GB/T 16991，紡織品 色牢度試驗 高溫耐光色牢度：氙弧
- FZ/T 75002，涂層織物 光加速老化試驗方法 氙弧法
- GB/T-8430, Textiles - Tests for colorfastness - Colorfastness to artificial weathering: Xenon arc fading lamp test
- ISO 105 B02, Textiles-Tests for colour fastness-Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
|
| | | | - ISO 11798, Informationdocumentation – Permanence of writing, printing & copying on paper
- ISO 12040, Graphic Technology - Printsprinting inks
- ISO 18909, Imaging Materials – Processed photographic colour filmspaper prints
- ASTM D3424, Lightfastness of Printed Matter
- ASTM D4303 , Lightfastness of Artists’ Pigments
- ASTM D5010, Testing Printing Inks & Related Materials
- ASTM D6901, Standard Specification for Artists’ Colored Pencils
- ASTM F2366, Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight
|
| | | | - ASTM D4434, Poly Vinyl Chloride Sheet Roofing
- ASTM D4637, EPDM Sheet Used in Single-Ply Roof Membrane
- ASTM D4798, Xenon-Arc – Bituminous Materials
- ASTM D4811, Nonvulcanized Rubber Sheet Used as Roof Flashing
- ASTM D5019, Reinforced Non-Vulcanized Polymeric Sheet
- ASTM D6083, Liquid Applied Acrylic Coatings Used in Roofing
|
| | | | - ISO 3865, Rubber, Vulcanized or Thermoplastic – Methods of test for staining on contact with organic materials
- ISO 4665, Rubber, Vulcanized or Thermoplastic – Resistance to weathering
- GB/T 12831，硫化橡膠人工氣候（氙燈）老化試驗方法
|
| | 粘合劑 | | - ASTM D904, Exposure of Adhesive Specimens to Artificial Light
- ASTM C1442, Conducting Tests on Sealants Using Artificial Weathering Apparatus
- ASTM C1501, Standard Test Method for Color Stability of Building Construction Sealants
|
| | | | - ASTM C1442, Conducting Tests on Sealants Using Artificial Weathering Apparatus
- ASTM C1501, Color Stability of Sealants
|
| | | | ASTM D6551, Accelerated Weathering of Pressure-Sensitive Tapes by Xenon Arc |
| | 建筑材料 | | • GB/T 16259，建筑材料人工氣候加速老化試驗方法 |
| | 電工電子產品 | | GB/T 2423.24，電工電子產品環境試驗 第2部分：試驗方法 試驗Sa：模擬地面上的太陽輻射 | |
您好, 歡迎來到化工儀器網
