您好, 歡迎來到化工儀器網
IEC 61215標準中紫外試驗的解讀
IEC 61215標準中紫外試驗的解讀
張恒 孫杏蕾
美國Q-Lab公司中國代表處
摘要：本文詳細解讀了IEC 61215:2005標準中的紫外預處理試驗。介紹了材料耐候性老化測試原理，包括戶外老化及紫外光加速老化測試原理，從光譜的定義、輻照度的設定、溫度及濕度控制等幾個方面對IEC 61215:2005標準中的紫外試驗進行分析。zui后指出QUV運行該標準時的參數設定。
關鍵字：IEC 61215；光伏組件；紫外試驗；GB/T 9535
Study of the UV test of IEC 61215:2005 standard
Zhang Heng, Sun Xinglei
Abstract:This paper studied the UV pretreatment test of IEC 61215:2005 standard in detail. First, it explained the test principle of material ageing, including ageing both in outdoor condition and UV accelerating condition. Then, the UV test of IEC 61215:2005 standard is discussed from the aspects of the definition of spectrum, irradiation setting and the control of temperature and moisture .Finally, the setting of parameters in QUV test was recommended. www.hongzhangroup.com
keywords:IEC 61215; Photovoltaic （PV） modules; UV test; GB/T 9535