久久久久亚洲精品男人的天堂,日本韩国男男作爱GAYWWW,特黄AAAAAAA片免费视频,av天堂电影网

產品展廳收藏該商鋪

您好 登錄 注冊

當前位置:
東莞市勤卓環境測試設備有限公司>技術文章>ASTM D4434

技術文章

ASTM D4434

閱讀:993          發布時間:2019-8-12

ASTM D4434

本頁面標準信息均來源于網絡收集,或由參與標準制定的供應商提供,只作為參考使用,為確保測試結果的準確性、節省您的時間,如需ASTM D4434標準詳細信息或ASTM D4434具體測試方法,可與我們技術人員聯系或給我們留言,我們將為您提供相關的技術支持。


聚氯乙烯屋面薄板的標準規范:

本規范規定了擬用于單層屋頂薄膜的、用聚氯乙烯樹脂作為初級聚合物而制造的柔性薄板空氣暴露測試程序。

kingjo氙燈試驗箱ASTM D4434測試方法

 

ASTM D4434測試方法

 

ASTM D4434英文簡介

This specification covers flexible fiber- or fabric-reinforced sheet made from poly(vinyl chloride) resin as the primary polymer intended for use in single-ply roofing membranes exposed to the weather. The sheet shall contain. In-place roof system design criteria such as fire resistance, material compatibility, wind uplift resistance, in-situ shrinkage, among others, are beyond the scope of this specification. The physical requirements for which the sheet materials shall be tested on and shall conform accordingly to are as follows: overall thickness and thickness over scrim; tensile strength at break; breaking strength; elongation at break; seam strength; retention of properties after heat aging; tear resistance and tearing strength; low temperature bend; cracking and crazing after accelerated weathering test; linear dimensional change; change in weight after immersion in water; and static and dynamic puncture resistance.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers flexible sheet made from poly(vinyl chloride) resin as the primary polymer intended for use in single-ply roofing membranes exposed to the weather. The sheet shall contain reinforcing fibers or reinforcing fabrics.

1.2 The tests and property limits used to characterize the sheet are values intended to ensure minimum quality for the intended purpose. In-place roof system design criteria, such as fire resistance, material compatibility, wind uplift resistance, in-situ shrinkage, among others, are factors that must be considered but are beyond the scope of this specification.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitation prior to use.

2. Referenced Documents (purchase separately)

ASTM Standards

D570 Test Method for Water Absorption of Plastics

D638 Test Method for Tensile Properties of Plastics

D751 Test Methods for Coated Fabrics

D1004 Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

D1204 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D2136 Test Method for Coated Fabrics--Low-Temperature Bend Test

D3045 Practice for Heat Aging of Plastics Without Load

D5602 Test Method for Static Puncture Resistance of Roofing Membrane Specimens

D5635 Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

D7635/D7635M Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that se Laboratory Light Sources

G154 Practice for Operating Fluorescent Light Apparatus for V Exposure of Nonmetallic Materials

G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

收藏該商鋪

登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~

對比框

產品對比 產品對比 聯系電話 二維碼 意見反饋 在線交流

掃一掃訪問手機商鋪
189-2580-2250
在線留言
美女脱了内裤张开腿让男人桶网站| 欧美国产在线视频| 欧美久在线观看在线观看| 好爽别插了无码视频| 99热精品在线| 亚州欧美综合网| 国产日韩精品一区二区| 欧美亚洲国产精品专区| 国产成人综合久久精品推荐| 久久久久久久久热| 99久久国产综合精品网成人影院| 亚洲欧美日韩中文视频| 91国内精品久久久久免费影院| 新婚人妻和上司出差被中出| 成人无码精品1区2区3区免费看| 发现老公与儿媳妇有暧昧怎么处理| 亚洲欧美日韩综合俺去了| 无码人妻一区二区三区在线视频| 成全视频在线观看高清动漫| JAPONENSIS中国农村| 一区二区视频免费观看| 色屁屁一区二区三区视频国产| 亚洲欧美日韩中文字幕在线| 精品久久久无码中文字幕边打电话| 亚洲伊人伊成久久人综合网| 午夜精品久久久久久| 国产精品久久久久久夜夜夜| 国产日韩欧美在线观看不卡| 免费国精产品WNW2544| 小小的日本在线观看免费高清| 亚洲国产欧美在线人成精品一区二区| 四虎影视久久久免费观看| 一路向北高清完整版免费观看| 久久999精品国产只有精品| 门卫老头吮她的花蒂在线观看| 亚洲午夜精品久久久久久app| 国产二级一片内射视频播放| 欧美国产亚洲日韩在线二区| 国产日韩成人内射视频| 亚洲日韩精品国产一区二区三区| AI迪丽热巴喷水视频在线观看|